Zinsser B-I-N is a shellac primer, sealer, and stain killer. It sticks to almost any surface. Think glossy plastic, metal, and even glass. No sanding needed. It’s a real problem-solver.

B-I-N blocks tough stains. Think water marks, smoke damage, nicotine, and sap streaks. It also blocks bad smells, like smoke, fire damage, and pets. It dries in just 15 minutes. You can topcoat it in under an hour.

Key Features of B-I-N Shellac Primer

• Sticks to glossy surfaces, no sanding needed
• Blocks tough stains: water, smoke, nicotine, and sap
• Seals in bad smells
• Dries in 15 minutes, recoats in 45
• Covers up to 12.5m² per litre
• Topcoat with emulsion or almost any paint

Where to Use B-I-N Shellac Primer

• Ceilings, walls, doors, trim, cabinets, and furniture
• Drywall, plaster, filled areas, and ceiling tiles
• Wood or metal doors, windows, and panelling
• Glossy paints and clear finishes
• Spot priming outdoors on metal, PVC, or wood

How to Apply B-I-N Shellac Primer

1. First, check the surface is clean, dry, and free of dust or grease. We advise using Zinsser Cleaner & Degreaser first.
2. Remove loose bits and sand rough edges.
3. Stir well before use.
4. Apply with a brush, roller, pad, or sprayer. One coat is usually enough.
5. Let it touch dry for about 15 minutes.
6. Recoat after 45 minutes. Full cure takes 1 to 3 days.
7. Clean brushes with Zinsser B-I-N Brush Cleaner & Restorer.

Coverage

Covers up to 12.5m² per litre. Touch dry in 15 minutes. Recoat after 45 minutes. Fully cured after 1 to 3 days.

Colour

Comes in White and Grey.

Sizes Available

500ml, 1L, 2.5L

Safety & Restrictions

• For indoor use, plus spot outdoor priming.
• Keep the area well ventilated.
• Keep out of reach of children.

B-I-N is a real go-to whenever a surface won’t behave. Stubborn stain, stuck-on smell, or glossy finish — this primer sorts it.