Dulux Satinwood Brilliant White is the go-to finish for interior woodwork. It gives a mid-sheen satin that sits between matt and gloss, smart without the hard shine, and it stays white rather than yellowing off over the years.

That last point matters more than it sounds. Old solvent-based glosses go yellow, particularly on doors behind curtains or in rooms that get little daylight. This is water based and non-yellowing, so a white door still looks white a few years on.

Key Features of Dulux Satinwood Brilliant White

• Mid-sheen satin finish
• Non-yellowing, so it stays white
• Water based and low odour
• Quick drying
• Self-undercoating on most sound surfaces
• Non-drip formulation
• Wipeable once fully dry
• Covered by the Dulux Promise

Where to Use

• Interior doors and door frames
• Skirting boards and architrave
• Window sills and frames
• Bannisters, spindles, and stair strings
• Radiators and interior metalwork
• Built-in wardrobes, shelving, and cupboard doors

How to Apply Dulux Satinwood Brilliant White

1. Remove loose dust with a dry brush or a vacuum.
2. Wipe the surface with a damp cloth. Water based paint grips better on a slightly damp surface.
3. Stir the tin thoroughly before you start.
4. Apply the first coat with a good quality brush.
5. Leave at least 6 hours, longer in cold or damp conditions.
6. Apply the second coat. Two coats are recommended.
7. Leave doors and windows open until the paint is fully dry, or they will stick.

Coverage

Up to 16m² per litre. A 750ml tin gives around 12m² per coat, roughly two average interior doors with two coats. The 2.5 litre covers around 40m² per coat, which suits a full set of doors and skirtings in one go.

Colour

Pure Brilliant White, a clean bright white in a satin sheen. If you want a softer neutral instead, we stock the same paint in nine other shades including Magnolia, Natural Calico, and Timeless.

Sizes Available

Choose 750ml or 2.5 litre from the options above. The 750ml suits a couple of doors or a room of skirtings. Go for the 2.5 litre if you are working through a whole house.

Safety & Restrictions

• For interior use only
• Keep out of reach of children
• Avoid contact with eyes, skin, and clothing
• Contains preservatives that may produce an allergic reaction
• Do not spray, as hazardous respirable droplets may form
• Ventilate the room while painting and drying
• See the tin label for full safety information

Clean, bright, and still white in five years. Dulux Satinwood Brilliant White is the safe choice for interior woodwork. Choose your size and order today.