Dulux Easycare Bathroom Brilliant White is a tough, moisture-resistant soft sheen emulsion designed specifically for bathrooms. Its mould resistant formulation protects the paint against mould for five years, so your bathroom stays looking clean and bright for longer — even in steamy, humid conditions.

The soft sheen finish holds up to moisture and condensation far better than standard emulsions, and it’s easy to wipe down when it needs a clean. Formulated to stay white, so the finish won’t yellow over time.

Key Features of Dulux Easycare Bathroom Brilliant White

• Moisture resistant formulation for bathroom environments
• Mould resistant technology — protects against mould for 5 years
• Soft sheen finish — practical and easy to wipe clean
• Stays white — won’t yellow over time
• Coverage up to 13m² per litre
• Two coats recommended; leave 6 hours between coats
• Wait at least 24 hours before exposing the room to steam or condensation
• Apply by brush or roller
• Covered by the Dulux Promise

Where to Use Dulux Easycare Bathroom Brilliant White

• Bathroom walls and ceilings
• Shower rooms and en suites
• Any interior space regularly exposed to moisture, steam or condensation

How to Apply Dulux Easycare Bathroom Brilliant White

1. Make sure the surface is clean, dry and free from dust and grease
2. Stir thoroughly before use
3. Apply with a brush or roller in smooth, even strokes
4. Leave 6 hours between coats — do not apply in very damp, humid or extreme temperature conditions
5. Apply a second coat for full coverage and durability
6. Wait a minimum of 24 hours after the final coat before subjecting the room to steam or condensation
7. If switching between tins, mix them together in a larger container to ensure a consistent finish throughout

Coverage

Dulux Easycare Bathroom Brilliant White covers up to 13m² per litre. A 1L tin covers approximately 13m² over two coats; a 2.5L tin covers approximately 32m² — enough for an average-sized bathroom. Coverage may vary depending on surface texture and porosity.

Sizes Available

Available in 1L and 2.5L.

Safety & Restrictions

• For interior use only
• Allow a minimum of 24 hours after the final coat before exposing the room to steam or condensation
• Do not apply in very damp, humid or extreme temperature conditions
• Keep away from children
• Water-based — wash tools in water immediately after use
• Store in a cool, dry place away from frost