Zinsser AllCoat Exterior Satin protects wood, metal, masonry, plastic, concrete, and cladding. It’s self-priming. So you usually won’t need a separate primer.

This paint goes straight over old paint. That includes gloss, bitumen, tar, varnish, or creosote. No sanding needed. The first coat seals the surface. The second coat adds extra protection.

Key Features of AllCoat Exterior Satin

• Self-priming — skip the extra primer
• Recoats in just 1 hour
• Flexible finish, resists cracking
• Great colour retention
• Lasts up to 15 years
• Covers up to 12m² per litre

Where to Use AllCoat Exterior Satin

• Exterior wood, metal, and cladding
• Masonry, plastic, and concrete
• Old paint, including gloss and bitumen
• New concrete or masonry (cured 30 days)

How to Apply AllCoat Exterior Satin

1. First, remove any mould or mildew.
2. We advise using Zinsser Cleaner & Degreaser first, to clear grease and dirt.
3. Sanding isn’t usually needed, even on gloss.
4. Apply the first coat with a brush, roller, pad, or sprayer.
5. Let it touch dry for about 1 hour.
6. Recoat after 1 hour for full protection.
7. Leave to cure. Full cure takes 7 days.

Coverage

Covers up to 12m² per litre. Touch dry in 1 hour. Recoat after 1 hour. Fully cured after 7 days.

Colour

Comes ready-made in White, Black, and Anthracite Grey (RAL 7016). Also comes in tint bases, mixed to any BS, RAL, or NCS colour.

Sizes Available

1L, 2.5L, and 5L.

Safety & Restrictions

• For outdoor use.
• Contains a biocide to fight fungal damage.
• Keep the area well ventilated.
• Keep out of reach of children.

AllCoat Exterior Satin saves real time on outdoor jobs. It’s self-priming and built to last.