Cuprinol Wood Preserver Clear gives sound wood a head start against rot and decay, making it a smart first step before you paint, stain, or varnish. This water-based formula suits both indoor and outdoor timber.

The low odour formula soaks into the grain rather than sitting on the surface, so it works from within the wood itself. First, you brush it on. Then, it gets to work, stopping problems before they take hold and giving your timber a longer life.

Key Features of Cuprinol Wood Preserver Clear

• Helps stop rot and decay before they start
• A useful first step before painting, staining, or varnishing
• Water-based, low odour formula
• Works on both indoor and outdoor timber
• Clear finish that keeps the wood’s natural look

Where to Use Cuprinol Wood Preserver Clear

• Sheds, fences, and other outdoor timber
• Indoor wood that needs a protective boost
• Any sound wood ahead of a paint, stain, or varnish finish

How to Apply Cuprinol Wood Preserver Clear

1. Check the wood is clean, dry, and free from loose debris.
2. Give the tin a good stir before you start.
3. Brush it on, working it well into the surface.
4. Leave to dry. This usually takes around 16 hours, depending on conditions.
5. Apply a second coat for the best results.

Coverage

This 5 litre tin covers roughly 25m² across 2 coats.

Sizes Available

This is the 5 litre tin. A smaller 1 litre size is also available.

Safety & Restrictions

• Suitable for indoor and outdoor use
• Keep out of reach of children
• Make sure the area is well ventilated while applying
• Check the tin label for full safety guidance

Cuprinol Wood Preserver Clear sets your timber up for whatever finish comes next. Give it this head start, and your wood will thank you for years to come.