Bedec Multi Surface Paint (MSP)® is the original all-surface, all-purpose paint for interior and exterior use. It’s self-priming and self-undercoating, which means it bonds directly to almost any surface without a separate primer — saving time, money and an extra coat.

First developed in the early 1990s, MSP has built its reputation through word of mouth across DIY, trade, commercial and industrial use. It carries a Class 1 Wet Scrub Rating (BS EN 11998:2006), is water-based and low VOC, and won’t yellow over time.

Key Features of Bedec Multi Surface Paint MSP

• Self-priming and self-undercoating — no separate primer needed on most surfaces
• Interior and exterior use
• Water-based, low VOC and microporous
• Non-yellowing formula
• Class 1 Wet Scrub Rating (BS EN 11998:2006)
• Apply by brush, roller or spray
• Coverage 12–14m² per litre
• Touch dry in under 2 hours; recoatable in 4 hours
• Manufactured in the UK

Where to Use Bedec Multi Surface Paint MSP

• Wood, MDF, chipboard and cladding
• Plastic, UPVC, melamine and powder coating
• Aluminium, galvanised steel, iron, steel, copper, brass and lead
• Plaster, masonry, render, brick, concrete and drywall
• Tiles (ceramic), glass, fibreglass (GRP) and slate
• Fascias, soffits, acoustic tiles and terracotta
• Previously painted surfaces, varnish and woodstain
• Weathered bitumen, creosote and tar varnish

How to Apply Bedec Multi Surface Paint MSP

1. Make sure the surface is clean, dry and free from dust, grease and loose material
2. No primer or undercoat is needed on most surfaces — MSP goes on direct
3. Stir thoroughly before use
4. Apply by brush, roller or spray in smooth, even coats
5. Leave to touch dry — under 2 hours at normal conditions
6. Apply a second coat after 4 hours
7. Two coats are recommended for best coverage and durability

Coverage

Bedec Multi Surface Paint MSP covers 12–14m² per litre per coat, depending on surface texture and porosity. Coverage will be lower on very porous or rough surfaces.

Colours Available

We stock MSP in four colours at 250ml: White (Satin), Black (Satin), Gold (Metallic) and Silver (Metallic).

Sizes Available

We stock this product in 250ml. MSP is also available in 750ml, 2.5L, 5L and 20L — ask us in-store if you need a larger size.

Safety & Restrictions

• Water-based — wash tools in water immediately after use
• Do not apply in temperatures below 8°C or above 35°C
• Keep away from children
• Store in a cool, dry place away from frost
• Some surface footnotes apply — see Bedec’s technical data sheet for surface-specific preparation notes