ProDec Taping Knife Smoothing Knife

ProDec smoothing and taping knife 12 inch.
ProDec smoothing and taping knife 8 inch.

ProDec Taping Knife Smoothing Knife

SKU PTK001 Categories , , Brand:

From£11.50 inc VAT£9.58 ex VAT

The one that makes a plasterboard joint disappear. SK7 blue steel blade, heat treated and lacquered, with a laser-straight edge — and straightness is the point, because any wave in a blade leaves ridges you end up sanding out. Aluminium bridge, soft grip handle, and comfortable enough for a full day of jointing. Also brilliant for chasing bubbles out from under vinyl. Pick 8", 10", or 12".

Flexible SK7 Blue Steel Blade
Ergonomic Soft-Grip Handle
Rust-Resistant & Durable
Back in stock notification We will inform you when the product is back in stock. Please leave your email below.

A ProDec Taping Knife is the tool for getting plasterboard joints flat. It beds jointing tape down tight, fills seams and holes, and leaves the lowest possible profile so the wall looks seamless once plastered.

The laser-straight edge is what does the work. Any wave in a blade leaves ridges behind, and ridges mean sanding. This one stays true, so the joint disappears into the board instead of announcing itself under the paint.


Key Features of the ProDec Taping Knife
  • SK7 heat treated high carbon blue steel blade
  • Lacquered finish to resist rusting
  • Laser-straight edge
  • Strong yet lightweight aluminium bridge, crimped along the blade
  • Bridge riveted to the handle with two heavy duty 20mm rivets
  • Ergonomic soft grip handle that reduces hand fatigue
  • Hanging hole for storage

Where to Use
  • Jointing plasterboard and drywall during installation
  • Bedding scrim tape and jointing tape
  • Filling seams between boards
  • Spot repairs and filling holes
  • Applying and smoothing textured products

How to Use the ProDec Taping Knife
  1. Check the joint is clean and the boards are fixed tight.
  2. Apply a bed of jointing compound along the seam.
  3. Lay your tape into the wet compound.
  4. Draw the blade along at a shallow angle to bed the tape and squeeze out the excess.
  5. Apply a thin coat over the top, feathering the edges outward.
  6. Let it dry, then apply further coats using a wider blade each time.
  7. Wipe the blade clean between coats, as dried compound on the edge causes ridges.

Choosing the Right Width

Most people work up through the sizes rather than picking one. Start with the 8″ to bed the tape and for spot repairs. Move to the 10″ for the second coat, then the 12″ for the final skim, feathering wider each time.


Also Good for Vinyl and Decals

The straight edge chases air bubbles out from under vinyl without damaging the material, so this earns its place well beyond plasterboard work. Useful if you apply signage, wraps, or wall graphics.


Sizes Available

Choose 8″ 200mm, 10″ 250mm, or 12″ 300mm from the options above.


Safety & Restrictions
  • Keep out of reach of children
  • The blade edge is thin. Handle and store with care
  • Clean and dry after use. Lacquered is not the same as stainless
  • Do not lever or pry with it, as this bends the blade out of true

A straight edge, a comfortable handle, and a blade built to stay flat. The ProDec Taping Knife is what makes a joint disappear. Choose your size and order today.

Related Products

[acoplw_badge]
Polycell Ready Mixed Plaster Repair 2.5L – filler for repairing cracks and damage in plaster walls and ceilings
Back in stock notification We will inform you when the product is back in stock. Please leave your email below.