Filltite Fill & Finish Classic is a ready-to-use white paste filler for small interior and exterior repairs. It goes on straight from the tub with no mixing needed and leaves tough repairs that won’t shrink or crack. This classic, ready-to-use filler works on a wide range of surfaces and is ideal for occasional repairs around the home.

Available in two sizes — 330g for small touch-ups and 1.5kg for more frequent use. Created in Great Britain and manufactured in France.

Key Features

• Ready to use white paste — no mixing required
• Will not shrink or crack once dry
• Suitable for interior and exterior use
• Compatible with a wide range of substrates
• Can be covered with paint or wallpaper when dry

Ideal For

• Filling screw holes, nail holes, and small surface damage
• Repairing cracks and holes in walls and ceilings
• Use on concrete, brick, breeze block, plaster, plasterboard, and wood
• Interior and exterior repairs before painting or wallpapering
• Occasional DIY repairs around the home

Application Instructions

1. Ensure the surface is clean, dry, and free from loose material
2. Apply straight from the tub using a filling knife or flexible scraper
3. Press firmly into the repair and leave slightly proud of the surface
4. Allow to dry fully — approximately 24 to 48 hours at 5mm thickness
5. Sand smooth once dry and apply paint or wallcovering as required

Safety & Restrictions

• Do not apply to frozen, wet, or damp substrates
• Do not apply below 5°C or above 35°C
• Not suitable for structural repairs
• Wear a suitable dust mask when sanding
• Keep away from children and pets until fully dry