ProDec Paint Roller Trays are built to sit still and stay put. The construction is robust with a low centre of gravity, so the tray will not tip and dump your paint across the floor even when you are loading a roller quickly. Five sizes are available, from a 4″ mini up to a 15″ heavy duty.

Every tray in the range is made from 100% recycled plastic. The shoreline carries a ribbed profile, which gives the roller something to grip against so it rolls out rather than skidding. That is what gives you an even load and stops the roller arriving at the wall half wet and half dry.

Key Features of ProDec Paint Roller Trays

• Made from 100% recycled plastic
• Low centre of gravity, so the tray resists tipping
• Ribbed shoreline gives the roller grip for even loading
• Robust, stable construction throughout
• Suits all types of paint, varnish, lacquer, and wood treatments
• Washes out easily after use
• Five sizes from 4″ mini to 15″ heavy duty
• Compatible with ProDec disposable tray liners

Where to Use

• Walls and ceilings with a full-size roller
• Doors, frames, and radiator gaps with a mini roller
• Emulsion, masonry paint, and trade tubs
• Varnish, lacquer, and woodstain
• Large open areas needing a wide roller
• Tester pots and small touch-up jobs

How to Use ProDec Paint Roller Trays

1. Sit the tray on a level surface, or drop a liner in first if you are using one.
2. Pour paint into the deep well. Do not fill above the shoreline.
3. Dip the roller into the well, then roll it back and forth on the ribbed section.
4. Keep rolling until the sleeve is evenly loaded all the way round.
5. Scrape excess back into the well with a non-abrasive tool rather than the tray edge.
6. Wash the tray out with water or the right solvent as soon as you finish.

Choosing the Right Size

Match the tray to your roller. The 4″ Mini holds 250ml and suits mini rollers for doors, frames, and tight gaps. The 7″ holds 350ml for narrow rollers. The 9″ holds 1 litre and is the standard choice for most walls and ceilings. Step up to the 11″ Heavy Duty at 2.5 litres, or the 15″ Heavy Duty at 4 litres, when you want fewer trips back to the tin on a big job.

Capacities at a Glance

• 4″ Mini — rollers to 100mm, holds approx. 250ml
• 7″ — rollers to 175mm, holds approx. 350ml
• 9″ — rollers to 225mm, holds approx. 1 litre
• 11″ Heavy Duty — rollers to 275mm, holds approx. 2.5 litres
• 15″ Heavy Duty — rollers to 375mm, holds approx. 4 litres

Sizes Available

Choose 4″ Mini, 7″, 9″, 11″ Heavy Duty, or 15″ Heavy Duty from the options above.

Safety & Restrictions

• Keep out of reach of children
• Do not overfill past the shoreline
• Never pour leftover paint down the drain. Let it dry out first
• Carry a loaded tray with both hands and keep it level
• Follow the paint tin’s guidance on solvents when cleaning

Stable, easy to load, and made from recycled plastic. ProDec Paint Roller Trays are the sensible base for any roller job. Choose your size and order today.