The Hippo Plasterboard Patch & Repair is a self-adhesive metal mesh patch for fixing holes in plasterboard and plastered walls. It uses a reinforced fibreglass mesh with an incorporated aluminium plate for extra strength. This plasterboard repair patch creates a permanent, solid base for filling and finishing.

Quick and easy to apply with no special tools needed. Simply press the patch over the hole and finish with plaster or an interior filler for a perfectly smooth surface.

Key Features

• Self-adhesive fibreglass mesh for easy application
• Incorporated 100mm x 100mm aluminium plate for extra strength
• Creates a permanent repair on plasterboard and plastered walls
• No additional adhesive or backing required
• Compatible with plaster and interior filler for a smooth finish

Ideal For

• Repairing holes left by removed plug sockets and light switches
• Fixing accidental holes and damage in plasterboard walls
• Repairing holes from removed light fittings and downlighters
• Interior walls and ceilings on plasterboard or plastered surfaces
• Quick, permanent repairs without replacing entire sections of plasterboard

Application Instructions

1. Clean the area around the hole and remove any loose material
2. Peel the backing from the patch and position it centrally over the hole
3. Press the mesh firmly onto the wall ensuring good contact all around
4. Apply plaster or interior filler over the patch in thin coats
5. Allow to dry fully, sand smooth, and decorate as required

Safety & Restrictions

• For interior use only
• Not suitable for large or structural repairs — consult a professional if in doubt
• The aluminium plate must extend beyond the edge of the hole for a secure repair
• Keep away from children when not in use