Treatex Exterior Oils in Sheer gives a lightly tinted, near-clear finish. It has UV blockers built right in. It’s the pick for anyone who wants to protect timber but keep its natural look, rather than add a strong colour.

This oil soaks deep into timber. In a similar way to bark, it grips onto the wood’s tiny channels. As a result, it protects against tough weather. It gives a highly water-repellent, weather and UV resistant surface. This can stop cracks and swelling after treatment.

Key Features of Exterior Oils Sheer

• Lightly tinted, near-clear finish
• UV blockers built in, unlike Clear
• Easy to apply
• Highly water resistant
• No biocides or preservatives
• Safe for children’s toys

Where to Use Exterior Oils Sheer

• Decking and cladding
• Doors and windows
• Garden structures
• Other outdoor joinery
• Anyone wanting to keep timber’s natural look

How to Apply Exterior Oils Sheer

1. First, check the timber is dry, bare, and free of dirt or algae. Exotic or treated timbers should weather for about 3 months first.
2. Then, stir the tin well, both before and during use.
3. Apply with a brush, roller, or spray gun. Work in the same direction as the wood grain. Pay extra care to end grain.
4. Leave the first coat for about 12 hours before the next.
5. Apply a second coat, then leave for about 12 hours to dry.
6. Finally, apply a third coat if needed, for extra grip against wear.

Coverage

A 1L tin covers about 15m² in one coat. A 2.5L tin covers about 37m² in one coat. Rough sawn timber may use 2 to 3 times more.

Colour

This listing is for Sheer, a lightly tinted, near-clear finish with UV blockers.

Sizes Available

1L and 2.5L.

Safety & Restrictions

• For outdoor use only.
• Timber must be under 18% moisture. Apply between 8°C and 25°C.
• Keep out of reach of children.

As a result, Exterior Oils Sheer is a real dependable choice. It protects timber, while keeping that natural, barely-there look.