SupaDec PVA Bond Sealer Adhesive seals, bonds, and primes surfaces before you paint, plaster, or wallpaper. This versatile adhesive additive gives you a strong base to work on, whatever your next job is.

Dilute it with water to suit your task, then apply with a brush or roller. First, it seals. Then, it bonds. As a result, your next coat goes on evenly, with better adhesion and less absorption into the surface.

Key Features of SupaDec PVA Bond Sealer Adhesive

• Seals porous surfaces before painting, plastering, or wallpapering
• Improves adhesion for your next coat
• Dilutes with water to suit your job
• Quick drying, touch dry in 1 to 2 hours
• Versatile bonding agent and additive

Where to Use SupaDec PVA Bond Sealer Adhesive

• New plaster, before painting or wallpapering
• Porous walls and ceilings
• As a bonding agent, mixed into render or screed

How to Apply SupaDec PVA Bond Sealer Adhesive

1. Make sure the surface is clean, dry, and free from dust and loose material.
2. Dilute 1 part PVA to 4 parts water for sealing new plaster, or use undiluted as a stronger bonding agent, depending on your job.
3. Apply by brush or roller in an even coat.
4. Leave to dry. Touch dry takes 1 to 2 hours.
5. Allow 24 hours for a full cure before applying further coats or heavy work.

Coverage

This adhesive covers approximately 6m² to 8m² per litre, undiluted. Diluted coverage will be greater, depending on your mix ratio.

Sizes Available

Available in 1 litre, 2.5 litre, and 5 litre.

Safety & Restrictions

• For interior and exterior use
• Keep out of reach of children
• Ensure good ventilation when applying
• Avoid prolonged exposure to excessive heat once dry
• See tin label for full safety information

SupaDec PVA Bond Sealer Adhesive gives your surface the strong, sealed base it needs before your next job. Prepare properly and your finish will last longer.

supadec pva bond sealer